Hello! Recently, I created this fabulous background using our stencil butters. For fun, I made up a bunch of postcards and mailed them to art friends to see if any of them could guess how I’d created the background. While there were a few elements guessed correctly and some pretty close guesses, no-one actually guessed the correct combination of products or techniques. Today, this post reveals the process and products I used that kept them guessing!
The Crafter’s Workshop provided me with some product to create this project. The opinions I share are solely my own.
I decided to use some dark blue textured drawing paper, TCW926 Bubble Rebound stencil, and delicate surface tape (which is less sticky than painter’s tape and less likely to tear the paper when removing). Now, the real trick with this background technique is to choose an analogous color scheme (colors next to one another on the color wheel) that matches the color of the paper that you are using. Since I chose royal blue paper, I decided to choose three cool colors to match, and white to provide contrast against the darker blue paper. I chose shades that were lighter than the paper in order to have the paper texture show up and be more visible in the end design.
For this technique, you’re going to work with the stencil under the paper. Tape the paper in place over the stencil. For the first step, I chose to work with NeoColor II water soluble, wax pastel crayons. I wanted a water soluble product so that it would react later in the process, as you’ll see. Laying the crayon almost horizontally on the paper, color random patches of each color over the entire paper. Don’t press too hard, or you’ll lose the paper texture, yet press gently enough so that you can see the edges of the stencil’s outlines on the paper, as shown in the image, below. (You might want to try a couple of practice pieces first to get the amount of pressure just right).
Next it was time to apply the stencil butters. Again, I stuck within the same analogous color palette, so I chose to use the TCW9064 Turquoise stencil butter and the TCW9066 Orchid stencil butter. Using a fairly wide palette knife, I applied the orchid stencil butter randomly over the page first, immediately followed with the turquoise stencil butter randomly in other places (yet overlapping here and there so they blend a little). The trick with this technique is not to load the palette knife with too much stencil butter, don’t press hard with the palette knife, and just lightly scrape the palette knife at a 45 degree angle across the top of the paper. The stencil butter will get caught by the stencil cut out areas, showing the shapes and outlines of the stencil. It’s important that you don’t cover the paper completely, you still want to be able to see some of the Neocolor areas through and under the stencil butters in places. This is what gives the background depth and dimension. Do not wait for the stencil butters to dry!
The next step is to use a spritz bottle to add water drops to the top of the entire paper. You want random drops in different sizes scattered across the page, not a shower or a soaking. Think of the drops as adding a new layer of design to the background. Let the water drops sit on top of the butters and paper for 2 minutes. Note: The water will activate the NeoColor II crayons, blending them where the drops have landed.
Lay a dry piece of kitchen paper towel, with the embossed design down, over the stencil butters, and the entire paper. Using your hands horizontally across the paper, very gently pat the paper towel to remove the water drops and impress the paper towel texture into the stencil butters. This creates two levels of texture, one from the water drops (where the stencil butter will lift off the paper when you remove the paper towel), and one from the paper towel embossing impression pressed into the stencil butter.
Your background is now complete. It is also able to be reactivated by any moisture or wet product, so keep that in mind if you want to be able to work over the top of it. You will want to apply a coat of matte or gloss gel medium to seal it. I would use either an old credit card or a silicon catalyst blade/mini scraper to apply the medium, but you’ll have to work fast and light so as not to smear or reactivate the background design! Pro Tip: Get your medium set up on the tool first, and start it on a scrap piece of paper to adjust it before applying it to the actual piece.
Can you believe we are almost halfway through November already? Where does the time go sometimes?
A couple of weeks ago, I took a fabulous class in our Wanderlust 2020 course with Jennifer Pipe from Self Esteem Through Art. It was my first time trying alcohol inks and I had an absolute blast. If you are fascinated by watching things take on a life of their own, then I definitely recommend giving alcohol inks a try. It’s such fascinating fun to watch the inks flow and morph together, sometimes producing colours that you didn’t even use! It’s so cool! All my examples shown used a medium weight yupo paper.
To begin, I played with Ranger alcohol inks on the yupo paper. Then I let them dry fully for a day before I began my stenciling experiments. I took lots of photos as I went, and have included quite a few here for you to see the outcomes. If you have any questions, please feel free to pop them in the comments below, and I’ll do my best to reply to you.
For this page, I used stencil TCW899 Striped Mandala with TCW9012 Shimmery Goodness which dries iridescent. It gave this piece a translucent effect to the point that my friends were asking me how I got the alcohol inks into the mandala design (I didn’t, I just stenciled it over the top of the alcohol inks with a palette knife!). Doesn’t it look fantastic? This is definitely one of my favourite combinations.
My next experiment had me using the TCW924 Lush Petals stencilwith the TCW9033 Marcasite Silver Modeling Paste applied with a palette knife. Once the modeling paste was dry (the next day), I applied some mica sprays and finishing wax in silver to really make the design pop! I love the richness, dimension, and depth of the finished piece.
Next, I decided to use the TCW912 Wheat Stalks stencil with the TCW9037 Grecian Gold Modeling paste applied using a palette knife. To add a tiny bit of dimension, but not darkness to the wheat grains, I lightly applied some black stabilo all pencil to the edges of the stenciling. This helped the wheat stalks stand out from the background a little more. This is the perfect Thanksgiving combination and will make a beautiful greeting card.
For the last several pieces, rather than using a three dimensional modeling paste, I wanted to try tracing through stencils using Signo uni-ball pens. The names of the stencils are included in the captions below each photo.